Filter
Top Products
RQT9124
17
VAS (Voice Activated System) function
Recording stops automatically when silence
continues for about 3 seconds. If the unit
detects sound, the recording resumes.
When the VAS function is active and the recording is paused
during recording, “ ” and the recording indicator blink.
Cancelling VAS function:
Select “ ” in step
3
and enter.
Press
u
,
i
to select “ ” and
press
q
/
g
to enter.
Then “ ” is displayed.
* Turn the function off when recording
important matters.
*
Press
STOP
to stop the setting process midway.
1
2
3
Press +, – to select “ ” and
press
q
/
g
to enter.
AM PM
PM
A
Press and hold
•
FOLDER/
−
−
MENU
until
the menu screen is displayed.
“ ”
(blinking) is displayed.
•
FOLDER/
−
MENU
STOP
Recording
indicator
• Press
STOP
to stop the unit.
Preventing unnecessary recording (VAS)/Confirming possible (remaining) recording time
The “ ” display while stopped shows
approximate remaining memory.
“ ”
lights up in response to
the remaining time.
When there is only a little
∗
remaining memory left, “ ” blinks.
∗ The remaining memory falls below 5% of
total capacity of memory (
➜
page 44).
Confirming possible
(remaining) recording time
g While recording
1. Press and hold
•
FOLDER/
−
−
MENU
for 1 second or longer.
To return to the original display, press and
hold
•
FOLDER/
−
−
MENU
for 1 second or longer
again. (If you do not press, the original
display reappears in approx. 30 seconds.)
When there is only a little
∗
remaining memory
left while recording, the display is automatically
changed to the remaining recording time display.
g While the unit is stopped
1. Press and hold
STOP
for 1 second or longer.
Remaining recording time at
the current recording setting is
displayed for approx. 3 seconds.
hour minute
second
Remaining
recording time
Advanced Operations