Filter
Top Products
RQT9124
7
•
FOLDER/
−
MENU
STOP
After the battery is inserted, “ ” blinks on the display when the time is not set (e.g. at the time of
purchase). (After approx. 1 minute, the display changes to “ ” (blinking) in Hold off condition.)
The clock is used for preserving recording date and setting timer recording. Please set the time first.
Recording is possible even if the clock is not set. However, the Recording date, Recording start time is displayed as “ ”.
When the time display is
“ ” (blinking) or you
change the time
* Press
STOP
to stop the setting process
midway.
* The clock operates with the monthly
loss/gain of 60 seconds at normal
temperature.
* The time setting is cleared, if the battery
has been consumed completely.
When “ ” is blinking
• Switch Hold off (
➜
page 6).
• Press
STOP
to stop the unit.
Press +, – to set the year and
press
q
/
g
to enter.
Set month and day in the same way.
1
Ye a r Month
M D
Day
M D
Press
u
,
i
to select the time
display and press
q
/
g
to enter.
2
12-hour display24-hour display
Press +, – to set the time and
press
q
/
g
to enter.
You can adjust the time quickly by
pressing and holding +, –.
3
• Switch Hold off (
➜
page 6).
12-hour display24-hour display
1. Press and hold
•
FOLDER/
−
−
MENU
until the
menu screen is displayed.
“ ” (blinking) or
“”
(blinking)
is displayed.
2. Press +, – to select year display
“ **” and press
q
/
g
to enter.
If “ ” blinks, press
q
/
g
to enter.
3.
Follow step
1
,
2
and
3
shown at left.
Setting the time
Preparation