Filter
Top Products
RQT9124
5
Display while charging
(
Rechargeable
batteries can be refreshed about 300 times
)
While
charging
The display
changes.
Charging complete
When the computer recognises this unit, “ ” is displayed together with above display.
* The rechargeable battery and this unit may be
hot while charging. This is not a malfunction.
*
Batteries other than exclusive AAA Ni-MH rechargeable
battery (
➜
page 2) cannot be recharged on this unit. Do not
charge batteries that are not designed for this unit.
Blinking
The remaining battery display shown below is
displayed while recording or playing.
* If the battery runs out, “ ” or “ ” is displayed.
Charge the battery as soon as possible.
*
The battery does not need to be fully depleted before recharging.
* “ ” may be displayed when connecting
this unit to a computer, but the battery can be
charged. Refer to the descriptions on page 37.
* Remove the battery from the unit if you will not
use it for a long period of time.
*
Dry cell batteries (not included) can also be used. Please replace
battery within approx. 30 seconds for preservation of the clock data.
Upon purchasing, charge once before initial use. Charging time: Approx. 2 hours (Time required to become fully-charged from empty condition)
Charging the battery using a computer
Inserting the rechargeable battery
I
nsert the USB
cable straight
in the same
direction as that
of the terminal.
Computer
1
Insert the USB cable into this unit.
2
Insert the USB cable into the computer.
• Press
STOP
to stop the unit.
• Start the computer beforehand.
Inserting/Charging the battery
AAA LR03 battery
(included)
Make sure the battery faces the right directions.
This unit
USB cable (included)
• If rechargeable batteries are to be used,
rechargeable batteries manufactured by
Panasonic are recommended.
•
Do not use any other USB connection cables except the supplied one.
11
22
33
Preparation