Filter
Top Products
39
MENU
RETURN
AUTO RECORD STANDBY
REC TIMER
180 MIN.
AUTO RECORDING SETUP
EXIT
MENU
Using Auto Recording
Function
When the input signal is detected, the recording starts
automatically.
1 Connect the SD Multi AV Device with the
external device. (l 38)
≥Always use the AC adaptor. This function does
not work with the battery alone.
2 Set up the external device such as timer
setting.
3 Confirm that the image or sound signal is
not output.
4 Set the Power/Mode Switch to [REC] and
set the operation mode to [MPEG4].
5 Press the [MENU] Button.
6 Select [AUTO RECORDING SETUP] and
press the [1 SET] Button.
7 Set [REC TIMER] to desired time.
≥The setting time is the period between starting
recording and finishing recording.
8 Select [AUTO RECORD STANDBY] and
press the [1 SET] Button.
≥A verification message appears.
9 Select [YES] and press the [1 SET]
Button.
≥Transits to the standby mode and the power is
automatically shut down.
≥When the input signal is detected, the recording
starts.
≥Pressing the Recording Start/Stop button during
recording will stop the recording.
INITIAL SETUP
DISPLAY SETUP
RETURN
SETUP MENU
MPEG4 MODE
FINE
BEEP SOUND
ON
AUTO RECORDING SETUP
EXIT
MENU
5
6
RETURN
AUTO RECORD STANDBY
REC TIMER
180 MIN.
AUTO RECORDING SETUP
EXIT
MENU
4
REC
OFF
PLAY
7
8
MODE