Filter
Top Products
46
Connecting with the PC
1 Slide down the USB Terminal Cover to
open it.
2 Set the Power/Mode Switch to [PLAY].
3 Connect with the AC Adaptor 1. (l 10)
4 Connect the [USB] terminal 2 of the SD
Multi AV Device to the USB terminal of
the personal computer 3 using
supplied USB Cable
4.
≥The SD Multi AV Device works as a personal
computer peripheral. (Operation of the SD
Multi AV Device is disabled.)
≥The [Removable disk] icon appears in
[My Computer].
Starting the Software
ªStarting the SD-MovieStage Ver.2.0
1 [Start]>> [All programs (programs)]>>
[Panasonic]>> [SD-MovieStage]>> [SD-
MovieStage]
ªStarting the SD-Jukebox Ver.3.0
1 [Start]>> [All programs (program)]>>
[Panasonic]>> [SD-JukeboxV3]>> [SD-
JukeboxV3]
≥Connect the USB cable after the USB driver is
installed.
≥Use both the AC adaptor and the battery. Either
one alone does not allow the SD Multi AV
Device to be used with a personal computer.
1
1
1
2
RECOFF
PLAY
DC IN 4.8V
2
3
4
1
3,4