Filter
Top Products
62
ª Recording pictures supplied from
an external device (l 38)
≥Pictures containing the copy-protect signal
(copy guard) cannot be recorded.
≥The power is automatically turned off in
approx. 10 minutes after the SD Multi AV
Device stops. Turn the power ON again.
≥VOICE from an external device cannot be
recorded.
≥In the [REC] mode, video or audio is not
output from the [AV OUT] terminal,
irrespective of the setting of the AV Output
Control Switch.
≥A wide-format picture (picture of 16:9)
cannot be recorded properly.
≥For audio, the signals from the L (left)
channel and the R (right) channel for
stereo are mixed for recording in
monaural.
≥Do not plug in or pull out the video or
audio cord during recording. The
recording may not be performed correctly.
≥For pictures containing both the main
audio and sub audio, select either channel
before recording. Otherwise, you will not
be able to select either of the main audio
or sub audio. (Both audio channels are
mixed for recording.)
≥If pictures are recorded when TV
broadcasting signals are weak or pictures
are affected by noise, they may be
distorted or may not even be played back.
ª Useful Connection (AV Cradle
always connected) (l 37)
≥When connecting, turn the power [OFF].
≥Do not connect the SD Multi AV Device
simultaneously to the AV input socket and
AV output socket of one single device.
Otherwise, the display will be distorted.
ª Using Auto Recording Function
(l 39)
≥Do not turn the power switch to [OFF] or
[PLAY] in the standby mode.
≥When connecting, turn the power of the
external devices off.
≥Automatic recording can be set only once.
≥When the Memory Card is full of data,
recording automatically stops even if the
time set has not been reached.
≥The initial part of the picture may not be
recorded.
≥The recording timer does not work except
for automatic recording.
≥Allow about 1 minute for timer setting, etc.
on the external devices.
≥Do not plug in or pull out the AV Cable
while recording. Otherwise, the recording
may not be completed properly.
ª Connecting with the PC (l 46)
≥To erase pictures that you recorded on the
Memory Card by using the SD Multi AV
Device, be sure to erase them on the SD
Multi AV Device or by the SD-MovieStage
Ver.2.0 (supplied), not on a personal
computer (the exploror, etc.).
≥You may not be able to properly play back
on the SD Multi AV Device after editing the
recorded data or changing the image data
on a personal computer.
≥Moving Picture format (MPEG4) that can
be played back on the SD Multi AV Device
is ASF. (Depending on the file, it may not
be able to be played back even if it is in
ASF format.)
≥When you operate the SD Multi AV Device
using its buttons, pull out the USB cable.
(The SD Multi AV Device cannot be
operated in the [PC ACCESSING] mode.)
≥Use only the supplied USB cable.
≥Do not remove the AC adaptor when the
SD Multi AV Device is connected to the
personal computer.
≥If the SD Multi AV Device’s personal
computer peripheral mode
([PC ACCESSING] is displayed) is not
cancelled when the personal computer is
turned OFF, remove the USB cable.