Filter
Top Products
64
Before Requesting
Service
Power
1: The SD Multi AV Device power
cannot be turned on.
1-1: Is the power source connected
correctly?
1-2: Is the Battery fully charged? Charge it
with the AC Adaptor.
2: The SD Multi AV Device power shuts
off automatically.
2: If you do not use the SD Multi AV
Device for more than 10 minutes, the
power shuts off automatically to save
the Battery power.
3: The SD Multi AV Device power does
not stay on long enough.
3: Is the Battery low? Charge the Battery
or attach a fully charged Battery.
Battery
1: Battery runs down quickly.
1-1: Is the Battery fully charged? Charge it
with the AC Adaptor.
1-2: Are you using the Battery in an
extremely cold place? In cold places,
the operating time of the Battery
becomes shorter.
1-3: Has the Battery worn out? If the
operating time is still short even after
the Battery is fully charged, the Battery
has worn out.
Recording
1: Recording does not start although
power is supplied to the SD Multi AV
Device and the Memory Card is
correctly inserted.
1-1: Is the SD Multi AV Device turned on?
1-2: Is the write-protect switch set to
[LOCK]? Being set to [LOCK], the
Memory Card cannot be recorded.
1-3: Does the Memory Card have enough
free space? Delete useless data in the
Memory Card.
Playback
1: Recorded images are not clear.
1: Is [MPEG4 MODE] on the menu set to
[NORMAL] or [ECONOMY]? If
recording is done with it set to
[NORMAL] or [ECONOMY], images
with fine details may include a mosaic-
like pattern. Set [MPEG4 MODE] to
[SUPER FINE] or [FINE].
2: Playback images do not look
normal.
2: The picture may be damaged. In order
to prevent the loss of image data,
backing up on a personal computer is
recommended.
3: Actual recording time/still image
storage capacity in the Memory
Card is different from those
described in these Operating
Instructions drastically.
3-1: Actual recording time/still image
storage capacity depends on the kind
of the image.
3-2: When MPEG4 moving picture data, still
picture data, sound data, and audio
data are recorded in the Memory Card,
less capacity in the Memory Card can
be used.
4: While playing back a Voice file or a
Music file, the LCD Monitor is
suddenly turned off.
4-1: The LCD Monitor is automatically
turned off approx. 5 seconds after
starting playing back or recording a
Voice file. Pressing the [1 SET] button
turns on the LCD Monitor. However, in
the case of not conducting any
operation for approx. 5 seconds, the
LCD Monitor is turned off again. (The
LCD Monitor is on while stopping
playback (or pausing ).)
4-2: When the [POWER SAVE] mode is set
to [ON], the LCD Monitor is turned off 5
seconds after starting playback of a
Music file.