Filter
Top Products
Read this rst
E
NGLISH - 13
Preparation
Read this rst
Whenyoustarttheprojectionforthersttimeoraftertheprojectorisinitialised(
Æ
page 44), the LANGUAGE
menu and the INITIAL SETTING menu will be displayed.
Set those menus according to the usage conditions and environment.
The setting can be changed by navigating through the ON SCREEN MENU.
LANGUAGE
J
Select the required language setting. (
Æ
page 37)
Press ▲▼◄►buttons of the remote
1 )
control or control panel on the projector
to highlight the required language.
PLEASE SELECT LANGUAGE
SELECT
ENTER
Press the ENTER button to proceed to 2 )
the next INITIAL SETTING menu.
J
INITIAL SETTING
Select the required setting of INSTALLATION and
HIGH ALTITUDE MODE.
Press ▲▼buttons to select the required
1 )
menu.
Press ◄►buttons to change the settings
2 )
of INSTALLATION or HIGH ALTITUDE
MODE.
RETURN
SELECT
ENTER
INSTALLATION
INITIAL SETTING
FRONT/DESK
HIGH ALTITUDE MODE
SWITCH TO HIGH ALTITUDE MODE “ON” IF OVER 1400m(4593Ft).
OFF
INSTALLATION
z
(
Æ
page 18, 41)
FRONT/
DESK
Settingonadesk/oorand
projecting from front
FRONT/
CEILING
Mounting in the ceiling with a ceiling
mount bracket (sold separately) and
projecting from front
REAR/
DESK
Settingonadesk/oorand
projecting from rear (Translucent
screen is required)
REAR/
CEILING
Mounting in the ceiling with a ceiling
mount bracket (sold separately) and
projecting from rear (Translucent
screen is required)
HIGH ALTITUDE MODE (
z
Æ
page 10, 41)
OFF For use in normal environment
ON
For use at high altitude (above
1 400 m (4 593 ft))
Press the ENTER button to nish.3 )
Remarks
To return to the
z
LANGUAGE menu, press the
RETURN button in the INITIAL SETTING menu.