Filter
Top Products
Menu Navigation
E
NGLISH - 29
Settings
Menu Navigation
Navigating through the MENU
Operating procedure
J
Press the MENU button.1 )
The main menu is displayed.
PICTURE
POSITION
LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
SECURITY
NETWORK
PICTURE MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
COLOR TEMPERATURE
DAYLIGHT VIEW
STILL MODE
NOISE REDUCTION
TV-SYSTEM
STANDARD
DEFAULT
AUTO
OFF
OFF
AUTO
SELECT
ENTER
RETURN
Press ▲▼ to scroll to the required 2 )
main menu item and press the ENTER
button to select.
Select the required menu item from the
PICTURE, POSITION, LANGUAGE, DISPLAY
OPTION, PROJECTOR SETUP, SECURITY
and NETWORK *
1
menu. The selected item is
highlighted in orange and displays the sub-menu
on the right.
PICTURE
POSITION
LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
SECURITY
NETWORK
KEYSTONE
SHIFT
OVER SCAN
ASPECT
SELECT
ENTER
RETURN
Press the ENTER button.3 )
You can select a sub-menu item.
PICTURE
POSITION
LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
SECURITY
NETWORK
KEYSTONE
SHIFT
OVER SCAN
ASPECT
SELECT
ENTER
RETURN
Press ▲▼ buttons to scroll to the
4 )
required sub-menu item and press ◄►
buttons or the ENTER button to adjust
.
The selected item is called up and the other menu
items disappear from the screen.
KEYSTONE
If there is a lower level, the next level will be
displayed.
PT-LB90NTE only*1:
Remarks
Press the
z
MENU or RETURN button to return to the
previous menu. Press repeatedly to escape from
the menu mode and return to the projection.
Some items and functions may not be adjusted or
z
available, depending on the selected input signals.
Some settings are adjustable without any signals.
z
Called up item will disappear after 5 seconds
z
without any operation and return to the menu mode.
For the sub-menu items, see “Sub-menu” in the
z
“ON-SCREEN MENU”. (
Æ
page 30)
Resetting to the factory default
J
settings.
You can reset most of the customised settings to the
factory defaults by pressing the DEFAULT button of
the remote control.
Press button.
The operation depends on the screen displayed
currently.
While the sub-menu screen is displayed:
Q
The items of the sub-menu displayed currently are
reset to the factory default settings.
While the called up item screen is displayed:
Q
Only the item adjusted currently is reset to the fac-
tory default setting.
KEYSTONE
Remarks
You cannot reset all the settings at a time to the
z
factory default settings.
To reset all the settings to the factory defaults, see
“INITIALIZE ALL” in the “PROJECTOR SETUP
menu”. (
Æ
page 44)
Some menu items are not available to reset by
z
pressing the DEFAULT button. Adjust each menu
item manually.
The triangle mark under the bar indicates factory
z
default setting and the square indicates the current
setting.
The triangle mark position varies by the selected
input signals.
Default setting
Current setting