Filter
Top Products
Remote control operation
E
NGLISH - 27
Basic Operation
Setting up the image position
automatically
When a RGB signal is input, the projector adjusts the
SHIFT, DOT CLOCK and CLOCK PHASE
automatically.
Press button.
Screen Projected image
Remarks
The
z
SIGNAL SEARCH operation is also performed.
(When SIGNAL SEARCH is set to ON)
(
Æ
page 39)
If the dot clock frequency is 108 MHz or higher,
z
DOT CLOCK and CLOCK PHASE are not
effective. (
Æ
page 34)
If the projected image is too dark or blurred around
z
the edge, AUTO SETUP may stop the processing
before completing the adjustment and return to the
previous setting. Project a much clearer or lighter
image and try again.
Resetting to the factory
default settings
You can reset most of the customised settings to the
factory default settings by pressing the DEFAULT
button of the remote control.
Press button.
For details, see “Menu Navigation - Navigating
z
through the MENU - Resetting to the factory default
settings”. (
Æ
page 29)
Controlling the volume of the
speaker
You can control the volume of the built-in speakers
and output audio sound.
Press button.
+ button: increases the volume
z
-
z
button: decreases the volume
Projecting an image
in INDEX-WINDOW mode
You can project an image split in 2 windows as an
INDEX WINDOW. One is frozen and stored in
memory,anddisplayedonthescreen’sleftsidewhile
displaying subsequent image continues on the right.
Press button.
Press the RETURN button to escape.
The image being projected when the INDEX-
WINDOW button is pressed will be a frozen image.
Frozen
image
Continuing
image
Projected
image
J
INDEX-WINDOW display
Press▲▼buttonsto
capture a new image
and change the size in 3
ways.
In default, the frozen
image is displayed on the
left and the subsequent
image is displayed on the
right.Press◄►buttons
to switch the position.
Frozen
image
Frozen
image
Frozen
image
Continuing
image
Continuing
image
Continuing
image
Frozen
Image
Continuing
image
Frozen
Image
Continuing
image
Remarks
The aspect ratio of the image is changed and
z
becomes vertically elongated.
If you change the window size, the aspect ratio of
z
the image is changed. (
Æ
page 35)
While in
z
INDEX-WINDOW mode, press the ENTER
button to capture a new image and the frozen
image window will be updated in a moment.
When capturing a quick moving picture, perform
z
several times to get a stable picture.