Filter
Top Products
POSITION menu
36 -
E
NGLISH
Settings
S4:3
J
When a standard signal *
1
is input, the input signal
will be sized down 75% and projected. S4:3 mode
is effective when projecting 4:3 image onto a 16:9
screen.
Input signal: XGA
z
Image: Panel: Screen:
THROUGH
J
The image will be projected without any size
adjustment.
Input signal: NTSC
z
Image: Panel:
A standard signal has an aspect ratio of 4:3 or 5:4.*1:
Note
If you project a 4:3 image onto a 16:9 screen,
z
the image may distort or some portions may
be cropped. Select an aspect ratio (4:3) which
preserves the intention of the image creator.
Remarks
The order of
z
ASPECTtypesisdenednotonlyby
the input method but also by the input signals.
If you project a copyrighted image enlarged or
z
distorted by using ASPECT function in commercial
use in a public place, such as a restaurant or hotel,
you might infringe on the copyright of the creator
which is protected by copyright law.
FRAME LOCK
If the projected image is degraded, you can activate
FRAME LOCK for synchronisation. (Available with
signals of RGB only)
Change setting
Change setting
ON Active
OFF Deactive