Filter
Top Products
Remote control operation
26 -
E
NGLISH
Basic Operation
Remote control operation
Capturing an image
You can freeze the projected image and stop the
sound temporarily, regardless of the playing condition
of the connected device.
Press button.
Press the FREEZE button again to escape.
Stopping the projection
temporarily
You can stop the projection and audio sound through
the projector temporarily.
Press button.
Press the AV MUTE button again to escape.
Switching the input signal
You can switch the input signal corresponding to the
computer to be projected.
COMPUTER
J
Press button.
Press the COMPUTER button to cycle through the
options.
COMPUTER1
Signal input to
COMPUTER1 IN
terminal
COMPUTER2
Signal input to
COMPUTER2 IN
terminal
J
NETWORK
(PT-LB90NTE only)
Press button.
NETWORK
Signal transmitted by “Wireless
Manager” from computer through
network (
Æ
page 47)
VIDEO
J
Press button.
Press the VIDEO button to cycle through the options.
S-VIDEO
Signal input to S-VIDEO IN
terminal
VIDEO Signal input to VIDEO IN terminal
If INPUT GUIDE under the ON-SCREEN DISPLAY
in the DISPLAY OPTION menu is set to DETAILED
(
Æ
page 38),youcanconrmtheselectedinput
terminal in the graphical input terminal guide at the
upper right of the screen. (Highlighted in yellow is the
selected terminal.)
Youcanchangetheinputwith▲▼◄►buttons.
It may take some time to change the image after the
input signal is switched.
Note
Input a compatible signal shown in the “List of
z
compatible signals”. (
Æ
page 54)
Remarks
For the input terminals, see “Connections”.
z
(
Æ
page 19)
If no operation is performed, the input guide
z
disappears automatically.
If the
z
INPUT SELECT button on the control panel is
pressed, the input is switched in the following order.
(
Æ
page 14)
COMPUTER1 COMPUTER2 S-VIDEO
NETWORK *
1
VIDEO
PT-LB90NTE only*1: