Filter
Top Products
56
Accessing from the Web browser
<Top window>
Using WebBrowser (cont.)
1
Click [ ] on the launcher.
Or start up the WebBrowser, and enter the IP address
set by the projector.
WebBrowser starts up and the page of “Projector control window” appears.
2
Select the language to be displayed, and if a web
access password has been set, enter that password.
3
Click [ENTER].
“Basic control window” appears. (Next page)
• Password used in this page is for accessing the web control window. (See page 58)
This password is different from the password set in page 47 for accessing a projector.
• If you forget the password, perform [INITIALIZE] using the wireless menu of the
projector, and set a password once again using the “Change Password” window on
the web browser (See page 58).
• The top window may not appear depending on the WebBrowser. In this case start up
WebBrowser again, or press the [Ctrl] + [R] keys for example to update the screen.
• Connection cannot be made while the WebBrowser is set to dial-up network.
Cancel the dial-up network setting.
• It may take some moments for WebBrowser to start up.