Filter
Top Products
66
Frequently Asked Questions (cont.)
No wireless connection can be made between my projector and my computer. (cont.)
<When another firewall has been detected>
Are any firewall-containing applications installed?
If any applications which contain firewalls are installed, the installation may hang
up at the [Projector search in progress] display (some firewalls function even when
not started).
If this occurs, firewall settings must be changed in order to allow connection to the
wireless network. See the User’s Manuals for all applications containing firewalls
to perform these settings.
<When the user does not have the administrator authority>
Have you logged in as the Administrator?
If you have logged onto a computer as a [GUEST] or a restricted user who
does not have administrator authority, you can not perform easy wireless set
up (Network No. [1] – [4]). If you must perform easy wireless set up without
administrator authority, designate [U] as the network number.
See page 49 or 51 for instructions in how to set [U] as the network number.
<Network setting error>
When connecting with Network number [U], make sure whether wireless menu
setting of the projector is correct or not. (See page 49)
Wireless connection is lost shortly.
The wireless LAN utility used by the computer may have changed the wireless
settings. Close the utility, and then make the connection again using easy
wireless set up connection.
Connection may be broken receiving influence from wireless environment
around.
When connection is broken, PT-LB50NT/PT-LB55NT/PT-LB60NT automatically
work to reconnect, but when it can not, live is cancelled.
When live is cancelled with PT-LB50NT/PT-LB55NT/PT-LB60NT or connection
is broken with projectors other than PT-LB50NT/PT-LB55NT/PT-LB60NT, start
live from the launcher again.