Filter
Top Products
16
%3 Escape Button [ESC]
This button is used to escape and execute the currently
highlighted setting on the setup menu. The monitor
screen will then return to the previous setup menu.
%4 Direction Buttons [t ▲ s ▼]
These buttons are used to control the pan/tilt head in
the normal operations when the Combination Cameras
are connected to the transmitter.
%5 Menu Button [MENU]
This button is used to open or close the setup menu on
the monitor screen.
%6 Audio Mute Button [AUDIO MUTE]
This button is used to mute the outgoing sound from the
local site.
Pressing it again will restore the sound.
%7 Enter Button [ENTER]
This button is used to confirm the selection in the setup
menu or to open the submenu where more details are
set.
%8 Camera Control Buttons
These buttons are used to operate the zoom/focus lens-
es capable of remote control if they are mounted on the
cameras.
TELE/WIDE: Zooms in or out the image.
NEAR/FAR: Adjusts the focus.
AF: Focusing is automated and adjusted to the best
position thanks to the built-in circuitry.
%9 Connection Port
This port is used to connect with the REMOTE port on
the rear of the WJ-NT204 Network Interface Unit.
To connect to the unit, use a 6-conductor modular
cable supplied as an accessory with the controller.