Filter
Top Products
5. Security
5-2
March 2001 3160-A2-GB24-10
Establishing Access Security on a Port
Although the password feature is available, it is not required as a factory default. If
used, it ensures access security before device control is passed to a device
connected to a port. The password configuration option can be individually set for
the COM or MODEM port, or both
if security is needed on both port types. The
default is
None.
The password itself is set separately (refer to the following
section,
Setting a Password
on page 5-3).
Procedure
To establish access security on a port:
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the key until the User selection appears on the
screen.
5. Select User.
6. Press F1 (Next) until the Password configuration option appears.
7. Select port(s) to receive access security (None, Com, Modem, or Both). Use
the scroll keys, if necessary.
F1
F2 F3
Edit:
Chan Gen User
F1
F2 F3
Password:None
Next None Com