Filter
Top Products
SNMP MIB Objects
E-2
3162-A2-GB20-30March 1999
Address
Translation
Group
Not supported since this group is not supported in MIB II.
IP Group Supported.
ICMP Group Supported.
TCP Group Supported.
UDP Group Supported.
EGP Group Not supported since the EGP protocol is not supported by
the DSU/CSU.
Transmissio
n Group
Supported on the T1 interfaces using the DS1/E1 MIB.
Supported on the synchronous data ports using the
RS-232-like MIB. Supported on the COM and AUX ports
using the RS-232-like MIB.
SNMP Group Supported.
System Group, MIB II
The System Group objects are fully supported by the DSU/CSU. The following
sections provide clarification for objects contained in the System Group where it
is not otherwise clear how the object definition in MIB II is related to the
DSU/CSU. Objects not mentioned are supported as stated in the MIB.
System Group – “sysDescr” Object (system 1)
This object provides the full name and version identification for the system
hardware and software. This object displays the following string:
[
Company Name
] T1 DSU/CSU; model
xxxx-xx-xxx
; S/W Release:
yy.yy.yy
; H/W
CCA:
zzzz-zzz
; Serial number:
ssssssss.
Where: xxxx-xx-xxx
represents the full model number of the unit.
yy.yy.yy
represents the software revision number of the unit.
zzzz-zzz
represents the hardware revision number of the unit.
ssssssss
represents the serial number of the unit.
System Group – “sysObjectID” Object (system 2)
This object provides the authoritative identification of the network management
subsystem contained in the unit.
This object displays the following object identifier:
3162 [
Company OID
].1.14.2.2.7
System group –”sysContact” Object (system 4)
This object provides a textual identification of the contact person for this
managed node.