Paradyne 3611 Computer Drive User Manual


 
Configuration Worksheet for MCMP Mode (1 of 3)
Date:________________________________________________ Location:_____________________________________________
Local Phone No.: (
j )______________________________
Device:______________________________________________ Local Address:_________________________________________
j DBM Installed
Serial No.:____________________________________________ Tributary Network Address:_______________________________
j SNA Diagnostic Interface (LPDA-2) Installed
MUX Setup Value
MUX Funct:
(MCMP)
TDM, MCMP, CBrdg, EBrdg, None
Share DevA: Enab, Disab
Lowest Port#: 1, 2, 3, 4, 5
#Ports in Gp: 2, 3, 4, 5, 6
Port Cntrl: Host, DSD
Share DevB: Enab, Disab
Lowest Port# 1, 2, 3, 4, 5
#Ports in Gp: 2, 3, 4, 5, 6
Port Cntrl: Host, DSD
P1/2 FEPSh: Enab, Disab
P3/4 FEPSh: Enab, Disab
P5/6 FEPSh: Enab, Disab
MCMP Bckup* MCMP, TDM
*Switched 56 DBM only
**Available for MCMP/Flex with DSU firmware version 6.3
x
or greater
Prt3 Options Value
AsyncSync Enab, Disab
Async Rate =Sync, 1800, 1200, 600, 300, 150
AsyncBit/Char 6, 7, 8, 9, 10
Stop Bits 1, 2
Overspeed 1.25, 2.5
RTS Cntrl FrcOn, DTE
TxCarrSel Const, Cntrl
RxCarrSel Const, Cntrl, Mark
PCC Buffer Enab, Disab
Elast Stor Enab, Disab
RTS/CTS Del
(Chang)
0–1040 ms (8 ms increments)
DTR Alarm Enab, Disab
Antistream
(Chang)
Disab, 1–100 sec (async terminal = 0–100)
DSR FrcOn Enab, Disab
DSR on Tst Enab, Disab
Extend Chan Yes, No
Upstrm Port Prt1, Prt2, Prt3, Prt4, Prt5, Prt6
DTE Port** EIA232, V.35
Prt1 Options Value
AsyncSync Enab, Disab
Async Rate =Sync, 1800, 1200, 600, 300, 150
AsyncBit/Char 6, 7, 8, 9, 10
Stop Bits 1, 2
Overspeed 1.25, 2.5
RTS Cntrl FrcOn, DTE
TxCarrSel Const, Cntrl
RxCarrSel Const, Cntrl, Mark
PCC Buffer Enab, Disab
Elast Stor Enab, Disab
RTS/CTS Del
(Chang)
0–1040 ms (8 ms increments)
DTR Alarm Enab, Disab
Antistream
(Chang)
Disab, 1–100 sec (async terminal = 0–100)
DSR FrcOn Enab, Disab
DSR on Tst Enab, Disab
Extend Chan Yes, No
Upstrm Port Prt1, Prt2, Prt3, Prt4, Prt5, Prt6
DTE Port** EIA232, V.35
Prt4 Options Value
AsyncSync Enab, Disab
Async Rate =Sync, 1800, 1200, 600, 300, 150
AsyncBit/Char 6, 7, 8, 9, 10
Stop Bits 1, 2
Overspeed 1.25, 2.5
RTS Cntrl FrcOn, DTE
TxCarrSel Const, Cntrl
RxCarrSel Const, Cntrl, Mark
PCC Buffer Enab, Disab
Elast Stor Enab, Disab
RTS/CTS Del
(Chang)
0–1040 ms (8 ms increments)
DTR Alarm Enab, Disab
Antistream
(Chang)
Disab, 1–100 sec (async terminal = 0–100)
DSR FrcOn Enab, Disab
DSR on Tst Enab, Disab
Extend Chan Yes, No
Upstrm Port Prt1, Prt2, Prt3, Prt4, Prt5, Prt6
DTE Port** EIA232, V.35
Prt2 Options Value
AsyncSync Enab, Disab
Async Rate =Sync, 1800, 1200, 600, 300, 150
AsyncBit/Char 6, 7, 8, 9, 10
Stop Bits 1, 2
Overspeed 1.25, 2.5
RTS Cntrl FrcOn, DTE
TxCarrSel Const, Cntrl
RxCarrSel Const, Cntrl, Mark
PCC Buffer Enab, Disab
Elast Stor Enab, Disab
RTS/CTS Del
(Chang)
0–1040 ms (8 ms increments)
DTR Alarm Enab, Disab
Antistream
(Chang)
Disab, 1–100 sec (async terminal = 0–100)
DSR FrcOn Enab, Disab
DSR on Tst Enab, Disab
Extend Chan Yes, No
Upstrm Port Prt1, Prt2, Prt3, Prt4, Prt5, Prt6
DTE Port** EIA232, V.35
Prt5 Options Value
AsyncSync Enab, Disab
Async Rate =Sync, 1800, 1200, 600, 300, 150
AsyncBit/Char 6, 7, 8, 9, 10
Stop Bits 1, 2
Overspeed 1.25, 2.5
RTS Cntrl FrcOn, DTE
TxCarrSel Const, Cntrl
RxCarrSel Const, Cntrl, Mark
PCC Buffer Enab, Disab
Elast Stor Enab, Disab
RTS/CTS Del
(Chang)
0–1040 ms (8 ms increments)
DTR Alarm Enab, Disab
Antistream
(Chang)
Disab, 1–100 sec (async terminal = 0–100)
DSR FrcOn Enab, Disab
DSR on Tst Enab, Disab
Extend Chan Yes, No
Upstrm Port Prt1, Prt2, Prt3, Prt4, Prt5, Prt6
DTE Port** EIA232, V.35