Filter
Top Products
4. AT Command Set and S-Registers
4-353830-A2-GB91-30 August 1998
Table 4-3
(6 of 20)
Model 3830 S-Registers
S37 Auto Redial
Works in conjunction with the Bad Lines Auto Originate and Rate Auto
Originate options. It allows repeated automatic dial backup attempts by
specifying the range of Directory Locations that can be tried. The modem
must be in Originate mode.
Register has the following values:
0 = Use Directory Location 1
1 = Use Directory Locations 1–2
2 = Use Directory Locations 1–3
3 = Use Directory Locations 1–4
D D D
D D D
9 = Use Directory Locations 1–10
NOTE: The modem must be in Originate mode to perform an automatic
dial backup.
S38 DTR Cont Repeat
Determines whether automatic dialing of dial backup directory locations
will be repeated continuously, or halted after the first pass.
Regardless of the setting of S38, dialing is locked out after ten failed
attempts to connect to the same number.
Register has the following values:
0 = Disable
1 = Enable
Factory setting is Disable.