Filter
Top Products
About This Guide
viii
8700-A2-GB20-00
April 2000
Section Description
Chapter 9 Transferring Code and Configurations Using TFTP. Shows
how to upload and download firmware and configuration
files.
Appendix A Configuration Options. Contains all configuration options,
default settings, and possible settings.
Appendix B Standards Compliance for SNMP Traps. Contains SNMP
trap compliance information.
Appendix C Connector Pin Assignments. Lists the pin assignments for
the front panel DTE connector.
Appendix D Technical Specifications. Contains physical and regulatory
specifications, network and port interfaces, power
consumption values, and accessory part numbers.
Appendix E Cross-Connection Worksheets. Contains worksheets to help
plan and configure the cross-connection of DTE and DSL
ports.
Glossary Defines acronyms and terms used in this document.
Index Lists key terms, acronyms, concepts, and sections in
alphabetical order.
Product-Related Documents
Document Number Document Title
7970-A2-GB20 Hotwire M/SDSL, M/HDSL, and HDSL2 Standalone
Termination Units, Models 7944, 7945, 7974, 7975,
7976, 7984, 7985, and 7986, User’s Guide
8000-A2-GB22 Hotwire Management Communications Controller
(MCC) Card, IP Conservative, User’s Guide
8000-A2-GB29 Hotwire Management Communications Controller
(MCC) Card User’s Guide
8610-A2-GN10 Hotwire 8610 DSLAM Installation Instructions
8810-A2-GN11 Hotwire 8810 DSLAM Installation Instructions
8820-A2-GN20 Hotwire 8820 GranDSLAM Installation Guide
Contact your sales or service representative to order additional product
documentation.
Paradyne documents are also available on the World Wide Web at
www.paradyne.com. Select Library → Technical Manuals.