Filter
Top Products
SNMP MIBs and Traps, and RMON Alarm Defaults
B-12
9664-A2-GB20-00March 2000
Table B-7. enterprise-Specific Traps and Variable-Bindings (2 of 2)
Trap Possible CauseVariable-Bindings
enterpriseMissedSLV-
Down(16)
H devFrExtDlciIfIndex
(devFrExt.mib)
H devFrExtDlciDlci
(devFrExt.mib)
H devFrExtDlciMissed-
SLVs
(
devFrExt.mib
)
SLV Timeout Error Event
Threshold has been exceeded.
String:
‘SLV down on $ifString due to
excessive SLV packet loss. Total
SLV packets lost is $numLost.’
enterpriseMissedSLV-
Up(116)
SLVs
(devFrExt
.
mib)
H devLastTrapString
(devHealthAndStatus.-
mib.)
SLV Timeout Error Event has
been cleared.
String:
‘SLV up on $ifString because
SLV communication was
reestablished. Total SLV packets
lost is $numLost.’
enterpriseRMON-
ResetToDefault(13)
H devLastTrapString
(devHealthAndStatus.-
mib)
All RMON-related option
changes have been reset to their
default values.
Default Factory Configuration
settings have been reloaded,
returning RMON-related options
to their original settings.
String:
‘RMON database reset to
defaults.’
enterpriseSelfTest-
Fail(2)
H devLastTrapString
(devHealthAndStatus.-
mib)
Unit has completed
(re)initialization and a hardware
failure was detected.
String:
‘Self test failed: $
s
.’ ($
s
is the
contents of devSelfTestResult.)
enterpriseTest-
Start(5)
For physical interfaces and
frame relay links:
H ifIndex (RFC 1573)
H .0.0 (placeholder)
H devLastTrapString
(devHealthAndStatus.-
mib
F i t l i it (DLCI )
At least one test has been
started on an interface or virtual
circuit.
String:
‘$testString test started on
$ifString.’ (e.g., ‘DTE Loopback
test started on Sync Data Port
S01P1.’)
enterpriseTest-
Stop(105)
For virtual circuits (DLCIs):
H devFrExtDlciIfIndex
(devFrExt.mib)
H devFrExtDlciDlci
(devFrExt.mib)
H devLastTrapString
(devHealthAndStatus.-
mib
All tests have been halted on an
interface or virtual circuit.
String:
‘$testString test stopped on
$ifString.’ (e.g., ‘Disruptive PVC
Loopback test stopped on
DLCI 100 of Sync Data Port
S01P1 frame relay.’)