Filter
Top Products
Security and Logins
4-7
9664-A2-GB20-00
March 2000
Limiting Telnet or FTP Access Over the TS Management Link
"
Procedure
To limit Telnet or FTP access when the session is on the TS Management Link:
1. Select the Telnet and FTP Session options.
Main Menu
→
Configuration
→
Management and Communication
→
Telnet and FTP Sessions
2. Disable Telnet Session and/or FTP Session, as appropriate.
3. Return to the Management and Communication menu, and select Node IP.
4. Set the following configuration options, as appropriate.
To . . .
Set the configuration option . . .
Disable access via a
TS Management Link
TS Management Link to None.
Assign an access level to the
TS Management Link
TS Management Access Level to Level-2
or Level-3.
NOTE: Regardless of a user’s login access
level, a user cannot operate at a level higher
than the access level specified for the session
(e.g., if a user has a Level-1 login and Level-2
telnet access has been set, the Level-1 user
can only operate as a Level-2 user).
If you are going to allow users to configure the
unit, keep the access at Level-1.
5. Save your changes.
See
Configuring Telnet and/or FTP Session Support
or
Configuring Node IP
Information
in Chapter 3,
Configuration,
for more information about these
configuration options.