Filter
Top Products
6
2.0 GENERAL INFORMATION
Thank you for your purchase of this Patton Electronics product. This
product has been thoroughly inspected and tested and is warranted for
One Year parts and labor. If any questions or problems arise during
installation or use of this product, please do not hesitate to contact Pat-
ton Electronics Technical Support at (301) 975-1007.
2.1 FEATURES
• Multi-Rate Symmetric DSL
• CAP (Carrierless Amplitude and Phase) Modulation
• Data Rates up to 2.304Mbps
• V.35 and X.21 Interfaces
• Interoperable with Popular Model 1095
• SNMP Manageable with 1095RC and 1001MC as 1001MC SNMP
Agent Rack Card
• NetLink Plug ‘n’ Play for Easy Installations
• Universal Power Options, 120VAC, 230VAC and -48VDC Available
• Front Panel Status Indicators
• CE Marked
2.2 DESCRIPTION
The Patton Electronics mDSL Rocket provides high speed 2-wire connectiv-
ity to ISPs, PTTs, and corporations using mDSL (Multi-rate Symmetric Digital
Subscriber Line) technology. Multi-rate DSL offers the ability to deliver the
maximum bit rate that a twisted pair line can accommodate. Supporting mul-
tiple line rates from 144 kbps to 2.320 Mbps, the NetLink provides “mega-
byte” speeds to leased line, LAN to LAN interconnection, and WAN access
networks over 3.6 miles/5.8 km (1.054 Mbps on 24AWG/.5 mm wire).
Model 1088/C provides a V.35 interface on an M/34 female connector. Model
1088/D provides an X.21 interface on a DB-15 female connector. Features
include loopback diagnostics, SNMP/HTTP remote management capabilities
using NetLink Plug-and-Play and inband externally accessible configuration
switches. All versions of the Rocket are compatible with Patton’s popular
Model 1095 standalone and 1095RC rack card.
As a symmetric DSL NTU, NetLinkTM mDSL offers the same data rates in
both directions over a single pair of regular telephone lines using Carrierless
Amplitude and Phase (CAP) modulation. Line connection is made by an RJ-
45 jack. Standard versions of Model 1088 are powered by a 100/230 VAC
(Universal) supply. The DC power supply option supports any DC input
between 36–72 VDC.