Filter
Top Products
Software Configuration Overview 33
Model 3124 User Manual 3 • Configuration
Firmware Write In Progress
The Flash Write process may take a few minutes. You must not turn off or reset the system during the pro-
cess.
Firmware Write Successful
When the Flash Write process has completed successfully, the Firmware Update Status shows “Firmware has
upgraded already”. You can now restart the system.
Software Configuration Overview
Note
For more detailed software configuration instructions, refer to the
Model 3124 Administrator’s Reference Guide available online at
www.patton.com/manuals/3124-arg.pdf and the Model 3124 Com
-
mand Line Reference Guide available online at www.pat-
ton.com/manuals/3124-cli.pdf.
The software architecture of the Model 3124 is shown in the figure below. It can be divided into three layers:
the management layer, the OAM&P layer, and the firmware layer.
Figure 33. Management Software Model
As in the figure, CLI shell, SNMP agent, and WEB server are in the top-most layer (management layer) of the
system software and offering OAM&P function of the DSLAM based on the conceptual management features
as follows:
• Configuration Management
• Performance Management
• Fault Management