Filter
Top Products
Syntax
{G,graphID,action,device,units,row,col,
mode,"name"
p
G1. G Graphic Header.
G2. graphID Unique number from 0 - 999 to identify the graphic image.
G3. action The action to perform to the graphic. Options:
A Add the graphic.
C Clear the graphic from the printer.
G4. device Graphic storage device:
R Volatile RAM (format must contain a graphic field)
T Temporary Storage
F Flash Memory
Note: If you are using flash memory, send the graphic only
once. Then, send only batches to reference it. If you
re-send the graphic each time, it creates separate
copies, and eventually fills up flash memory.
G5. units Unit of measure. Options:
E English, measured in 1/100 inches
M Metric, measured in 1/10 mm
G Graphic, measured in dots. For bitmapped graphics, G is
the only valid option.
G6. row Distance between the bottom of the graphic image area and
the first bitmap line. This is usually 0, unless you want a fixed
amount of white space around the graphic image. See
"Positioning the Graphic Image," for more information.
English 0 - 1200
Metric 0 - 3045
Dot 0 - 2436
G7. column Distance between the left edge of the graphic image area and
the left edge of first bitmap line. This is usually 0, unless you
want a fixed amount of white space around the graphic image.
See "Positioning the Graphic Image," for more information.
English 0 - 189
Metric 0 - 479
Dots 0 - 383
G8. mode Imaging mode. Enter 0.
G9. "name" Graphic name (optional), 0-8 characters, enclose within
quotation marks.
5-12
Creating Graphics