Filter
Top Products
17.
Turn the printer on. If you are:
•
replacing the supply with a new roll of the same size,
press
f
to align the printer.
•
changing supply size, adjust the supply sensor. See
"Adjusting the Supply Sensor" later in this section.
NOTE:
Before you print, be sure the menu supply type
setting matches your supply type (e.g. Black
Mark/Die Cut). See your Operator’s Handbook to
set supply options.
CAUTION
Turning the printer on and off rapidly can cause it to
malfunction. If you have turned the printer on (or off), wait
ten seconds before turning it back off (or on).
Loading Supplies
2. Loading Supply
2-15