Filter
Top Products
3.
Turn the power switch off and insert the power cord into
the socket. Plug the other end of the cord into a
grounded
115 VAC electrical outlet.
NOTE:
If you are going to use the printer online, also
connect the RS-232 cable.
4.
On the initial startup, leave the printer on for 24 hours to
charge the new backup batteries.
Socket
Power Cord
RS-232 Cable
CAUTION
If your 9445 printer has been in storage below room
temperature, allow 10-12 hours for the printer to adjust to
room temperature
before
turning the power on. Failure to
do this may damage the printer.
9445 Equipment Manual
1-2