Filter
Top Products
5.
Guide the edge of the ribbon around the ribbon guide post.
6.
Place the cassette on the ribbon spools and push it
against the back wall. The spool lock will drop out.
7.
Turn the upper ribbon spool
clockwise
until the ribbon is
tight.
Make sure the ribbon is not wrinkled or bunched
.
8.
Slide the supply up to the feed mark.
Make sure the
ribbon is correctly positioned
.
9.
While holding the cassette in place, turn the printhead
lever to the right to lock the printhead in place. Do not
force the lever.
10.
Close the front panel.
Upper
Ribbon
Spool
Ribbon
Guide
Post
Printhead
Lever
9445 Equipment Manual
3-8