Filter
Top Products
For Thermal Direct 40° to 104° F
(4° to 40° C)
Print Speed: 2.5 ips (64 mm) for all serial bar codes and 4.0 ips
(102 mm). 6.0 ips (152 mm) is available only for
thermal transfer printing.
Supply Specifications
For high temperature or high humidity environments, contact Monarch for
supply recommendations. Continuous supply does not have perforations
or black marks and must be used in continuous mode.
Supply Types: Thermal Transfer, Direct Die Cut, or Continuous
without black marks
Supply Widths: 1.2 inches (31 mm) minimum
4.25 inches (108 mm) maximum
Supply Lengths: 1.0 inch (31 mm) minimum
6.5 inches (165 mm) maximum
Supply Roll Length: 2,952 inches (75 meters)
Ribbon Specifications
Do not leave ribbon in sunlight, high temperatures or humidity.
Ribbon Type: Standard
Ribbon Widths: 1.3 inches (33 mm)
1.6 inches (41 mm)
2.16 inches (55 mm)
3.15 inches (80 mm)
4.13 inches (105 mm)
Ribbon Length: 23,600 inches (600 meters)
About Ribbons
The width of the ribbon must be greater than the supply width. Since
some supplies are more abrasive to printheads than others, using a
ribbon wider than your supply helps protect the printhead. Replacement
printheads are expensive.
15