Filter
Top Products
1-6 Installing the Print Server Hardware
Sample Test Page
The test page is best displayed using 4” wide by 6” long labels. If the label
is too small, some information may print outside the label edges.
PAXAR
------------------ PaxarNet Print Server Status -------------
PaxarNet Network Adapter-PLUS
FW Ver. CLM -3.99 (2003.02.19) Netware Retries: 0
Boot Ver. 7.3 Frame type Network Count
Ethernet: 00-40-17-0d-20-77 EN_11 00000302 9609
Node name: MON_002077 EN_802.2 Unknown 2931
EN_802.3 00000302 109314
EN_SNAP Unknown 3142
Active Services:
MON_002077_P1 AppleTalk Name:
BINARY_P1 MON_002077_P1_AT
TEXT_P1 AppleTalk Zone:
POSTSCRIPT_P1
PCL_P1
NetBIOS Computer Name:
MON_002077_S1 MON_002077
BINARY_S1 NetBIOS Domain:
TEXT_S1 MSBG_ENG
POSTSCRIPT_S1 Primary WINS server
PCL_S1 0.0.0.0
Secondary WINS server
0.0.0.0.
TCP/IP Enabled
Netware Enabled WiFi Channel: 11
AppleTalk Enabled WiFi SSID: abc123
POP3 Disabled WiFi Mode: INFRASTRUCTURE
DLC Enabled WiFi Speed: 11
NetBIOS/IP Enabled WiFi WEP: DISABLED
NetBEUI Enabled WiFi Signal Quality: 75%
LAT Disabled Actual SSID:
Banyan Disabled
Wired/Wireless: WIRED
IP address 10.1.88.155
Subnet mask 255.255.0.0 NETWORK STATISTICS
IP Gateway 10.1.110.254 Packets Received 428129
(set manually) Bytes Received 093759
Boot method STATIC Bad Packets Received 0
Boot tries 3 Receiver error mask 0000
Receiver overruns 79
Netware Status: No server enabled Packets Transmitted 2807
Mode: Queue Server Bytes Transmitted 257578
Server Name: Packet Collisions 22
Transmit packet fail 0
Firmware
versions
MAC
address
TCP/IP
settings
Set
method
should
match
defined
Method
Should be at
least 60%
Actual SSID
should match
WiFi SSID
Security
setting
WiFi settings
How print
server is
communicating