Filter
Top Products
Telnet Console Commands A-5
DElete
Removes configuration item.
EXIT
Exits console mode.
HELP
Displays the list of available commands.
INIT
Saves settings and initializes unit.
PUrge
Removes configuration item.
SAVE
Saves configuration settings.
SET DEFAULT
Sets print server to factory defaults.
SET LOAD [EN/DI]
Enables or disables firmware reload after exit.
SET LOAD HOst <name>
Sets node name of boot host (NetWare firmware load).
SET IP aa.bb.cc.dd
Sets IP address of load host (TCP/IP firmware load).
SET LOAD SOftware <filename>
Sets host firmware filename to load.
SET LOAD XModem
Begins XMODEM serial download of new firmware.
SET PAssword <password>
Sets console password (default is ACCESS).
SET PORT <parallelportname> BIDir [EN/DI]
Enables or disables bi-directional communications on specified portname.
SET PORT <parallelportname> DMA [EN/DI]
Enables or disables dma support on parallel port.
SET PORT <parallelportname> FSTB [EN/DI]
Enables or disables fast strobe mode support on parallel port.