Filter
Top Products
Telnet Console Commands A-7
SHOw SERVEr
Shows server parameters.
SHOw SERVEr COunters
Shows server statistics.
SHOw SERVEr QUeue
Shows print server internal queue.
SHOw TEstpage
Prints test page.
SHOw VErsion
Shows server firmware version.
UNPROTECT
Allows temporary access to SET commands when console is in protected mode.
Use SET DEFAULT to permanently disable protected mode.
ZEro
Zeros statistical counts.
802.11b Wireless Commands
SET ENet
802.11b Wireless Settings:
SET ENet APDEN [LOW/MED/HI]
802.11b access point density.
SET ENet AUTHtype [OPEN/SHARED]
Authentication type.
SET ENet CHannel nn
Sets 802.11b wireless channel.
SET ENet KEY# <1/2/3/4>
Sets which WEP key number to use (default is 1).
SET ENet KEYVAL <wepkey>
Sets WEP key value. Must be hexadecimal.
SET ENet MODE [IN/AD/PS]
Sets 802.11b wireless mode to infrastructure, ad-hoc, or pseudo ad-hoc.