Filter
Top Products
Pelco Manual C1921M-G (1/04) 33
Zoom on a camera
on the main
monitor.
1. Press the MAIN MONITOR key. The green LED over the
MAIN key lights.
2. Select the camera.
Addressing by Multiplexer (Switch 7 OFF)
a. On the number pad, press the multiplexer’s address
number (1-16 if the keyboard is connected to the
multiplexer; 1-8 if connected to a server), and then
press the UNIT key. The LED displays the address.
b. On the number pad, press the camera number (1-16),
and then press the CAM key.
Addressing Consecutively (Switch 7 ON)
On the number pad, press the camera number, and then
press the CAM key. Refer to Table A for camera numbers.
3. Press the LIVE/VCR key to select the operating mode.
4. Press the key below the zoom icon. Zoom will be 2X. Press
again for 4X.
5. Use the joystick to control the zoom location.
6. To exit, press the zoom icon key or the number of the
camera, and then press the CAM key.
1. Press the MAIN MONITOR key. The green LED over the
MAIN key lights.
2. Select a camera on the multiplexer you want to sequence.
Addressing by Multiplexer (Switch 7 OFF)
a. On the number pad, press the multiplexer’s address
number (1-16 if the keyboard is connected to the
multiplexer; 1-8 if connected to a server), and then
press the UNIT key. The LED displays the address.
b. On the number pad, press the camera number (1-16),
and then press the CAM key.
Addressing Consecutively (Switch 7 ON)
On the number pad, press the camera number, and then
press the CAM key. Refer to Table A for camera numbers.
3. Press the LIVE/VCR key to select the operating mode.
4. To sequence individual cameras, go to step 5. To sequence
groups of cameras, press the key below the 4- or 9-screen
icon, and then go to step 5.
5. Press the SEQ key.
Displays a 2X or 4X zoom of
the camera selected on the
main monitor.
Stops a sequence if one is in
progress.
Table E. Operation Guide (Continued)
OPERATION KEYBOARD COMMAND RESULT
(Continued on next page)
Run a sequence of
cameras from one
multiplexer on the
main monitor.
Starts the programmed
sequence of individual
cameras or groups of
cameras on the main monitor.