Perfectone Net Ware GW-200 Network Card User Manual


 
GW-200 User Manual
12

IPN:
Use IPN’s system

Yiyang:
Use Yiyang’s system

Thinker:
Use Thinker’s system
Suntek: Use Suntek’s system
service addr, service id
: Please put the URI (domain name/IP address)
of the server into “
service addr
”.
If “use service” is checked, please put the URI of gatekeeper into
service addr
” .The default service port is 1719. If the gatekeeper has a
GKID, please put it into “
service id
”.
If “
use service
” is not checked, to make calls through gateway, please put
the URI of the gateway into “service addr”. To make IP-to-IP call, please
clear this field. In both cases, the default service port is 1720.
nat traversal:
When the gateway with private IP address need
communicate with other IP phones in a different LAN or on Internet,
please select an item from dropdown list to set the proxy used by the
gateway.

disable:
Select this item when the log in server and gateway in the
same LAN, or the log in system supports the gateway working behind
the LAN.

enable:
When the system does not support gaeway working behind
the LAN, please select this item to search public IP address of the
NAT device. With this item selected, “
nat addr
field will be activated.
Besides, port mapping (port forwarding) needs to be properly set up
on NAT device.

citron:
With Citron private protocol used, select this item to fit into the
GnuGK system transferring the voice and signal by router.

auvtech:
Select this item with Auvtech private system used.

vida:
Select this item with Vida private system used.

aivgr: Select this item with aivgr private system used.
nat addr:
When
nat traversal
is set to
enable
”, please put the