Perfectone Net Ware GW-200 Network Card User Manual


 
GW-200 User Manual
7
Configuration
To configure GW-200, you can use web browser and Telnet commands.
Configure by Web browser
After you’ve got the local IP address of the gateway from the voice prompt, On a PC
connecting with the gateway or at the same segment of the gateway, double click
icon to open the IE browser. Input the IP address of the gateway into address
bar ( ), and then input password of the gateway into the
following page. Default password 1234 is ordinary password. Then
click button. The following configured page will popup. Input the data by
your computer’s keyboard according to your LAN parameters under the “network
settings”, “protocol settings”, “phone settings” and “audio settings”. When finished,
click “update” and quit the screen.