Filter
Top Products
GW-200 User Manual
20
use daylight: No needed to set for the Gateway(GW-200).
timezone:
No needed to set for the Gateway(GW-200).
When debug set as 0[disable], if input ordinary password (default one is 1234),
then following page will pop up after clicking . And only those
parameters can be modified.
Fig 3.7 Setting Page using ordinary pin with Debug set as 0 [disable]
Update:
Click this button to save the configuration and the phone will
reboot. Once the phone reboots successfully, the new configuration is
effective.
Note
After entering set page, if
Update
button is not clicked within 5
seconds, then when you click it again, the index page asking for pin
will pop up again. Then please input the password again to enter
the set page and then click
Update
button to confirm the
modification.
Phone Book:
Click this button to open the speed dial settings page. Please
refer to Fig 3.7. In this page, you can set and save the speed dial number by