Perfectone Net Ware GW-200 Network Card User Manual


 
GW-200 User Manual
25
Password:****
P:\>get
iptype 0[static]
ip 192.168.1.100 subnetmask 255.255.255.0 router
192.168.1.254
dns 202.106.196.152 dns2 202.106.196.115
nattraversal 1[enable] nataddr rtpport 5144
registerport 5142 signalport 5142 controlport 5144
account [empty] pin [empty]
phonenumber 182378009 fwdpoweroff 0[disable]
fwdalways 0[disable] fwdbusy 0[disable] fwdnoanswer
0[disable]
ringtype 0[dtmf0] answer 5
password 1234
upgradeaddr [empty]
sntpip 0.0.0.0 daylight 0[disable]
timezone 55[(GMT+08:00)Beijing,Hong Kong,Urumqi]
Command
set
Syntax description: set keywords value
Usage:
Used to configure password and other running parameters of
GW-200 gateway.
Detailed description:
set iptype X
Set how gateway gets relevant network parameters. X ranged
from 0 through 3: 0: authorize users set IP address, subnet mask
and router IP address of gateway manually; 1: use DHCP mode.
With this system, your LAN or router automatically assigns all the
required network parameters to any device connected to it when
the device log on. GW-200 gateway is shipped from the factory
with DHCP on. So, if your LAN or router is configured to use