Perfectone Net Ware GW-200 Network Card User Manual


 
GW-200 User Manual
29
www.ipchicken.com;
www.ipchicken.com;www.showmyip.com;www.whatismyip.com;
www.myipaddress.com; www.whatismyipaddress.com;
ip.sbbs.net;
www.whatismyipaddress.net;checkip.dyndns.org
set natttl XX
Set NAT TTL XX is an integer between 10 and 65535 sec. default
value is 20 sec.
set phonenumber XXXXXXXX
Set a phone number of GW-200 gateway. Value xxxxx must be an
Arabic numeral and no longer than 16 characters.
set account XXXXXX
While calling card is set, set account of chosen card; while local
type
is set use authentication type, set user ID; while
set
localtype
is set as 1, set ID.
set pin XXXXXXXXXX
While calling card is set, set password of chosen card; while
local
type is set authentication type, set password.
set registerport XXXX
Set register port. XXXX is range from 1024 through 6553.
set signalport XXXX
This port is Q.931 port using TCP protocol.
XXXX
is range from
1024 through 65535.
set controlport XXXX