Filter
Top Products
GW-200 User Manual
31
and pin; 5: use SHA1 authentication account and pin.
set dtmf X
Set DTMF relay type. X is ranged form 0 through 3: 0:control
string 1:inband audio 2: signal keypad 3:rfc 2833.
set dtmf payload X
When dtmf X select 3(rfc 2833).This parameter can be used
indicating type of RTP payload type. The value can be use integer
96-101.
set dialplan X
Enable/disable dial plan and dial number. Parameter X ranged
from 0 through 4: 0: disable dial plan; 1: enable dial plan; 2: use
dial number; 3: use 179XX service; 4: use hotline function.
set dialnumber XX
When
set dialplan
value
set as 2, please use this command to set
dial number.
For example, with eTalk card used, please set it as
00. When
set dialplan
value
set as 4, please use this command to
set hotline number.
set dddcode XX
Set the area code when set
dialplan
value set as
1
or
2
. For
example, the area code of Beijing is 10; the area code of Shanghai
is 21, and the area code of Chengdu is 28, etc. Parameter xxx
must be an Arabic numeral and no longer than 3 characters.
set iddcode XXX