Filter
Top Products
ENGLISH 14
HARDWARE ON SCREEN DISPLAY
An easy OSD menu to control and adjust by keyboard or mouse all the monitor parameters.
The H. OSD has five languages selectable by the user.
Hardware On Screen Display flow chart - MAIN MENU
OSD FUNCTIONS
GLOBAL MENU LOCAL MENU
____ 1-GUN / 3-GUNS
____ DEGAUSS
____ KEYLOCK (ALL / STORE / CNTRL / OFF)
____ ABC (FULL / REDUCED / OFF)
____ REF. SETTING (1 / 2 / 3 / 4 / 5)
____ LOCAL MENU ____ ABC MASTER (ON / OFF) <1>
____ POWER SAV. (ON / OFF)
____ AUTO DEG
AUSS (ON / OFF)
____ DAISY ADDRESS (ON / OFF)
____ DAISY CHAIN (ON / OFF)
____ INPUT (1-BNC / 3-BNC / DSUB)
____ ORBITING (ON / OFF)
____ LIGHT BAR (ON / OFF)
____ OSD REVERSE
____ OSD POSITION
____ SHOW CONFIG.
____ STORE REF. SET.
____ H. SIZE
____ V. SIZE
____ H. SHIFT
____ V. SHIFT
____ TILT
____ ABC CONTRAST
____ ABC BRIGHTNESS
____ SERVICE MENU
NOTES:
´ The DIRECT KEY ENTRY functions are transmitted over the daisy chain (if enabled) to set all monitors with the
same light paramiters (brightness and contrast)
´ The OSD MENUs are meant for SERVICE purposes only
´ The GLOBAL MENU functions are transmitted over the daisy chain (if enabled) to set all monitors with the same
paramiters.
´ The LOCAL MENU functions are intended for customising, NOT transmitted and only LOCAL executed.
<1> This function is executed ONLY on the LOCAL unit (that is going to be defined as ABC-Master). However, before the
local execution of the setting, the GLOBAL command “Reset All Master ABC Units” is transmitted over the Daisy-
Chain, in order to disable another (possible) already active Master unit.