Filter
Top Products
EN
32
Maintenance
Use the Maintenance menu to backup the current configuration, restore a
previously saved configuration, restore factory settings, update firmware,
and reset the Wireless Router.
Configuration Tools
Choose a function and click Next.
Backup allows you to save the Wireless Router’s configuration to a file. Restore can
be used to restore the saved backup configuration file. Restore to Factory Defaults
resets the Wireless Router to the original settings.
You will be asked to confirm your decision.
Firmware Upgrade
Use the Firmware Upgrade screen to update the firmware or user interface
to the latest versions. Download the upgrade file from www.philips.com/support
(Model SNB6500), and save it to your hard drive. Then click ‘Browse...’ to look for
the downloaded file. Click ‘BEGIN UPGRADE’. Check the Status page Information
section to confirm that the upgrade process was successful.
Reset
Click ‘REBOOT ROUTER’ to reset the Wireless Router.
If you perform a reset from this page, the configurations will not be changed back to
the factory default settings.
Note: If you use the Reset button on the rear panel, the Wireless Router performs a power
reset. Press the button for over five seconds, and the factory default settings will be
restored.
System
Time Settings
Select your local time zone from the drop down list. This information is used for log
entries and client filtering.
For accurate timing of log entries and system events, you need to set the time zone.
Select your time zone from the drop down list.
If you want to automatically synchronize the Wireless Router with a public time
server, check the box to Enable Automatic Time Server Maintenance. Select the
desired servers from the drop down menu.
Password Settings
Use this page to change the password for accessing the management interface of the
Wireless Router.
Passwords can contain from 3~12 alphanumeric characters and are case sensitive.
Note: If you lost the password, or you cannot gain access to the user interface, press the
reset button on the rear panel, holding it down for at least five seconds to restore
the factory defaults. By default, there is no password to login to the user interface.