Filter
Top Products
DM1000™ Digital Mailing System Operating Guide
SV60951 Rev. B 10-9
Envelope(s) getting
jammed
(continued)
• Envelopes dimensions are
outside the acceptable range
(piece of mail is too thick,
pieces of mail are incorrect
size, etc.) for mailing system.
• Feeder adjustment is set too
hig
h.
(continued)
To clear a jam in the transport area:
1. Lift the main cover.
2. Pull the transport jam release lever
to the
left until the assembly lifts up.
3. Remove the piece of mail.
4. Push the transport deck back to its original
p
osition until it snaps into place.
If condition persists adjust the thickness adjust-
ment knob for less tension (see procedure in
this chapter).
Envelope Feeding Problems
Description Possible Causes Solution
Transport Jam Release Lever
Raising the Transport Assembly