Filter
Top Products
DM1000™ Digital Mailing System Operating Guide
SV60951 Rev. B 2 - 5
Parts of the
Mailing System
This section describes the parts of your DM1000
™
mailing system and
includes:
• The Mailing System Exterior
• The Mailing System Interior
• The IntelliLink® Control Center
• The Main Screen
Mailing System
Exterior
Refer to the diagram for the location of each component.
IntelliLink® Control Center - This co
ntains the screen and key-
pad for communicating with the mailing machine and the built-in
post
age meter (Postal Security Device).
Main Cover - Prote
ct moving parts and prevent foreign objects
from entering the machine. The feed cover protects the feeder.
Wet/Dry Tape Lever - Move this le
ver down for dry tapes or
pressure-sensitive tapes; move it up to wet gummed tapes.
Stacker (not shown) - T
his is where mail is deposited after the
postage is applied to the piece of mail. It is located on the right
side of the machine. It may be a drop stacker, or an optional
U7PS Power Stacker.
Flats Guide - Keep
s flats aligned while feeding.
Feed Rollers - Rollers
that move the mail on the transport deck
into the feeder.
On/Off switch - T
urns the mailing system on and off. This is
located on the lower left side of the feed deck.
Feed Deck - Th
is is where you load the mail.
1
2
3
4
5
6
7
8