Filter
Top Products
10 • Troubleshooting
10-12 SV60951 Rev. B
Gummed tape is not
wet.
(continued)
Brush not out far enough to reach
tape.
1. Move the tape lever to the up position.
2. Move the brush lever to the right to pull the
br
ush mechanism forward.
3. Remove the brush.
4. Pull out brush and readjust to longer length.
5. Reinstall brush and release holder to return
or
iginal position.
Valve in moistener bottle cap is
not wo
rking.
Call the Help Desk. Refer to the Pitney Bowes
Contact Information List in the guide for more
information
Low E-Z Seal® Sealing Solution
message
is not working.
Call the Help Desk. Refer to the Pitney Bowes
Contact Information List in the guide for more
information
Tape Feeding Problems
Description Possible Causes Solution
Tape
Lever
Brush Lever