Filter
Top Products
2-6
Operation
Printing Postage
To print an envelope without sealing...
1. Hold the envelope by its bottom
edge.
2. Place the envelope ADDRESS SIDE
UP on the feed deck.
3. Push the envelope to the rear (A) so
its top edge is up against the Mailing
Machine’s back wall.
4. Slide the envelope to the right (B)
until the machine draws it in. The
envelope will be printed and ejected
into the stacker.
IMPORTANT NOTE:
Always ensure that your prints are clear and complete. Poor prints may be
rejected by Royal Mail. If you notice missing lines in the print as shown in
the illustration, perform printer maintenance as described on page 3-4 of
this guide.