Filter
Top Products
6-6 SV61503 Rev. A
6 • Machine Settings
Setting Sleep Mode Activation Time
You can set the amount of time the postage meter waits until enter-
ing "sleep mode". When the postage meter is in sleep mode, the
display is blank (except for the time in the lower right) and you can't
process mail. You awaken the postage meter by merely pressing any
button on the control panel.
1. Press Menu.
2.
Use the Review keys to scroll and select "Change Setup".
3. Use the Review keys to scroll and select "Change sleep timeout?".
4. Key in the desired amount of time (in minutes, from 1 - 20) the
postage meter should be idle before the sleep mode activates. A
Message displays confirming your choices.
5. Press Clear/Back to return to the main screen.
Setting/Disabling the Lock Code
The lock code prevents unauthorized access to your system after the
postage meter has been powered up and/or has entered sleep mode.
1. Press Menu.
2. Use the Review keys to scroll and select "Change Setup".
3. Use the Revi
ew keys to scroll and select "Use lock code setup?".
If you have already established a lock code, you are prompted to
enter it at this point.
4. Use the Review keys to scroll and select:
Turn On
Lock Code - Press Enter/yes at "Set a Lock Code?"
prompt. Type in a four-digit code and press Enter/yes. Re-enter
the same code to confirm. A message confirms your choice.
Change Lock Code - Press Enter/yes at "Change Lock Code?"
prompt. Type in a new four-digit code and press Enter/yes. Re-
enter the same code to confirm. A message confirms your choice.
Setting for Lock on Sleep - Press Enter/yes at "Change setting
for "Lock on Sleep"? prompt. At the prompt to "Lock on Sleep:",
choosing "Yes" forces the entry of the lock code when the ma-
chine is awakened after sleep mode.
Turn Off Lock Code - Press Enter/yes at "Turn Lock OFF?"
prompt. A message confirms your choice.
5. Press Clear/Back to return to the main screen.