Filter
Top Products
Installation
Planar PD7170 Installation/Operation Manual 29
PREL
I
MINA
R
Y
RS-232 Controller
Connection
Connect a PC or home theater control/automation system (if present) to the
RS-232 port on the PD7170; see
Figure 3-11. Use a standard, 9-pin serial cable,
wired straight-through.
For more information about using this connection, refer to Serial
Communications on page 69.
Figure 3-11. RS-232 Control System Connection
1
2
345
7
89
6
to Automation/
Control System
or PC
2 Transmit Data
3 Receive Data
5 Ground
(none of the other pins are used)