Filter
Top Products
Installation
Planar PD7170 Installation/Operation Manual 33
PREL
I
MINA
R
Y
3.10
Adjusting the Picture
Orientation
If the PD7170 is installed behind the screen, you must change the picture
orientation to match the installation method. To do this, press MENU on the
remote control. Then, select
System from the Main Menu.
Rear ProjectionIf the projector is used in a rear-projection application (see Figure 3-6), press
repeatedly to select Rear Projection from the System Menu. Press or to set it
to On.
Ceiling ModeIf the projector is ceiling-mounted, the PD7170 automatically inverts the image.
If this automatic inversion is not desired, select
Ceiling Mode from the System
Menu and set it to Off.