Filter
Top Products
Operation
Planar PD7170 Installation/Operation Manual 59
PREL
I
MINA
R
Y
Logo Display: This controls whether or not the Planar logo appears during
startup.
Power On Chime: This controls the audible chime at startup.
ControlSelect Control from the Main Menu to set various options related to control of
the projector.
Figure 4-15. PD7170 Control Menu
Lens Control: Select Lens Control from the Control menu to perform lens
adjustments (focus, zoom and lens shift). For detailed instructions, refer to Lens
Adjustments on page 31.
1 Key / 2 Key / 3 Key / 4 Key / 5 Key: These menu items assign the function of
the keys numbered 1 through 5 on the remote.
There are eight sources corresponding to the eight connections to the
projector. When you assign a source to a numbered key, the projector
immediately goes to that source when the key assigned to it is pressed.
If the chosen source is disabled via the Source Enable menu (refer to page 56),
this setting has no effect.
M1 Key / M2 Key / M3 Key: These menu items assign which memory setting to
recall when the M1, M2 or M3 key on the remote is pressed.