Filter
Top Products
Utility Commands
3
2. Utility Commands
This chapter describes the general-purpose utility commands.
get
The ITG implements TFTP client software. This command is used to download new revision
software from a remote TFTP server, or import dial plan and system configuration parameters
from a remote gateway.
get [ip_addr | host_name] [file]
Syntax Description
ip_addr IP address of the TFTP server.
host_name Host of the TFTP server
file Name of the file to be downloaded
help
The help command lists the top-level commands.
help
Syntax Description
This command has no arguments or keywords
reset
Use the reset command to reset the ITG. The CLI will prompt you to confirm the command
before resetting the ITG.
net reset
Syntax Description
This command has no arguments or keywords
ping
The ping command sends ICMP echo request packets to another host on the network.
ping host [count]
Syntax description
host The IP address or IP alias of the host.
count Number of echo request packets to send.